Autosell Neat Cutting Oil
Available Packaging : 20L
Product description
Recommended for machining ferrous as well as non-ferrous metals and for repetitive machining operations These are also recommended for free cutting on mild steel, which involve high spindle speeds and short cycle times, particularly on screw automats, capstan or turret lathes. . It is developed for severe metal cutting operations including gear cutting, broaching and threading of alloy and stainless steel. This provides a lubricating film which resists cutting stresses and gives very good surface finish and long cutting tool life. It provides anti-weld, oiliness and EP properties to these oils.
Formulation
Recommended for use at 5% to 12% by weight in a suitable paraffinic or naphthenic base and/or oils based on the intensity of the operational application. This additive is a sulfur EP agent with a high degree of sulfur activity used at various concentrations to formulate heavy duty cutting fluids machining operations.
Application
- Better surface finish, Non-staining.
- Longer cutting tool life
- Higher heat dissipation
- Excellent cooling and ant-weld characteristics
- longer cutting tool life over a wide range of operating temperatures.
- Not corrosive toward copper and aluminum
- Solubility in wide range of base oils including highly refined paraffinic stocks.
Typical Properties - Neat Cutting Oil
| Test Parameters | ASTM Method | Test Values |
Viscosity Cst @ 100 °C, |
D 445 |
8.5 |
Density @15 °C |
D 1298 |
1.02 |
Flash point°C, |
190 |
|
Pour point °C |
-21 |
|
Copper Strip Corrosion @100 °C |
Pass |
|
Sulphur Content |
Pass |
Typical Properties - Water Soluble Cutting Oil
| Test Parameters | ASTM Method | Test Values |
Viscosity Cst @ 100 °C, |
D 445 |
42 |
Density @15 °C |
D 1298 |
0.874 |
Flash point°C, |
D92 |
208 |
Pour point °C |
D97 |
-27 |
Emulsion Test, MM 1387 |
Pass |
|
Freeze Test,MM 1388 |
Pass |